节点文献

热循环温度对Ti-6Al-4V合金组织和力学性能的影响

Influence of thermal cycling temperature on microstructure and mechanical properties of Ti-6Al-4V alloy

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李文鹏陈永楠李中伟魏建锋赵永庆

【Author】 LI Wen-peng1,CHEN Yong-nan2,LI Zhong-wei1,WEI Jian-feng3,ZHAO Yong-qing4(1.Hebei Electric Power Research Institute,Shijiazhuang 050021 China; 2.School of Materials Science and Engineering,Chang’an University,Xi’an 710064,China; 3.State Key Laboratory for Mechanical Behavior of Materials,Xi’an Jiaotong University,Xi’an 710049,China; 4.Northwest Institute for Nonferrous Metal Research,Xi’an 710016,China)

【机构】 河北省电力研究院长安大学材料科学与工程学院西安交通大学金属材料强度国家重点实验室西北有色金属研究院

【摘要】 对上限温度为500、650、800℃高温短时热循环200次后的Ti-6Al-4V合金室温力学性能和组织进行了研究。结果表明:循环温度对合金强度影响较为明显,循环温度的升高使合金抗拉强度降低;分析认为:温度高于650℃,实验合金组织中β相逐渐分解碎化,β相含量减少和α晶粒逐渐长大是强度降低的主要原因。

【Abstract】 Microstructure and tensile properties of Ti-6Al-4V alloy after thermal cycling in the temperature range of room temperature to 500 ℃,650 ℃ and 800 ℃ were studied.The results show that with increasing of thermal cycling temperature,tensile strength of Ti-6Al-4V alloy decreases,β phase disintegrates and its volume fraction is reduced,and α grain grows gradually.It is argued that when cycling temperature below 650 ℃,the disintegration of β phase is responsible for the strength decreasing and when temperature above 650 ℃,the strength decreasement is ascribed to the decrease of β phase amount and α grains growth.

【基金】 国家重点基础研究发展计划资助项目(2007CB613807)
  • 【文献出处】 材料热处理学报 ,Transactions of Materials and Heat Treatment , 编辑部邮箱 ,2012年01期
  • 【分类号】TG146.23
  • 【被引频次】4
  • 【下载频次】237
节点文献中: 

本文链接的文献网络图示:

本文的引文网络