节点文献

微波辐射法合成阴离子型聚丙烯酰胺

Synthesis of Anionic Polyacrylamide under Microwave Irradiation

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 黄竹君赵殊吴宁聂福贵王非非

【Author】 HUANG Zhu-jun,ZHAO Shu,WU Ning,NIE Fu-gui and WANG Fei-fei(Heilongjiang Key Laboratory of Molecule Design and Preparation of Flame Retardant Materials,College of Science,Northeast Forestry University,Harbin 150040,China)

【机构】 东北林业大学理学院黑龙江省阻燃材料分子设计与制备重点实验室

【摘要】 以丙烯酰胺(AM)和丙烯酸钠(AA-Na)为原料,过硫酸铵为引发剂,N,N-亚甲基双丙烯酰胺为交联剂,用微波辐射进行水溶液聚合制备可溶解的阴离子型聚丙烯酰胺。探讨丙烯酸中和度、单体浓度、引发剂用量、交联剂用量及温度等对相对分子质量的影响。结果表明,单体浓度为19%,中和度为80%,引发剂用量为0.05%,交联剂用量为0.002%,反应温度35℃条件下合成的聚丙烯酰胺(PAM)的相对分子质量最高。

【Abstract】 The soluble anionic polyacrylamide was synthesis by aqueous solution polymerization under microwave irradiation,the acrylamide and sodium acrylate were used as the monomers,the ammonium persulfate was used as an initiator and the N,N-methylene-bis-acrylamide was adopted as a crosslinking agent.The effect of neutralization degree of AA,monomer concentration,dosage of crosslinking agent and initiator,and the reaction temperature on the molecular weight were discussed.The optimum reaction conditions were found as follows: the monomer concentration was 19%,the neutralization degree of AA was 80%,the initiator dosage was 0.05%,the crosslinking agent dosage was 0.002% and the reaction temperature was 35℃.Under these conditions,the polyacrylamide with highest molecular weight was obtained.

【基金】 国家科技支撑计划资助项目(编号:2006BAE03B06)
  • 【文献出处】 化学与黏合 ,Chemistry and Adhesion , 编辑部邮箱 ,2012年06期
  • 【分类号】TQ326.4
  • 【被引频次】2
  • 【下载频次】106
节点文献中: 

本文链接的文献网络图示:

本文的引文网络