节点文献

基于试验模态参数及结构动力学优化设计的有限元建模

Finite element modeling based on experimental modal parameters and structural dynamics optimization

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 殷海涛姜金辉张方沈敏

【Author】 Yin Haitao1 Jiang Jinhui2 Zhang Fang2 Shen Min2 (1.Department of Liaison engineering,Shanghai Aircraft D&R Institute,Shanghai 200436,China; 2.State Key Laboratory of Mechanics and Control of Mechanical Structures,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China)

【机构】 中国商飞上海飞机设计研究院联络工程部南京航空航天大学机械结构力学及控制国家重点实验室

【摘要】 准确的有限元模型是结构动力学分析强有力的工具。采用模态试验和有限元建模相结合的综合建模技术,采用结构质量最小为目标,以试验模态作为约束,分别以物理和几何参数为变量的结构动力学优化设计,对初始的有限元模型进行动力学优化。以GARTEUR飞机模型为例,在仅有试验模态参数、几何尺寸条件下,得到结构真实动力学特性的有限元模型。

【Abstract】 Accurate finite element model is powerful tool of structural dynamics analysis.The combination of model testing and finite element modeling is used in this paper.the initial finite element model is optimized by changing structural physical or geometrical parameters with minimum structural quality as a target,experiment model parameters as constraints.Taking GARTEUR aircraft model for example,Under the condition of only experimental modal parameters and geometry conditions left,the finite element model of structural with the real dynamic characteristics is obtained.

  • 【文献出处】 国外电子测量技术 ,Foreign Electronic Measurement Technology , 编辑部邮箱 ,2012年09期
  • 【分类号】O241.82;V214
  • 【被引频次】11
  • 【下载频次】198
节点文献中: 

本文链接的文献网络图示:

本文的引文网络