节点文献
音乐彩灯控制器的设计与实现
Design and Implementation of Musical Latern Controller
【摘要】 本方案利用带通滤波器把音乐信号分成三个频段,通过精密整流器再得到一直流电平。该直流电平随音乐信号强弱而上下浮动,然后直流电平再与阶梯波做比较,最终使电压比较器输出高电平的时间与音乐信号大小成正比,通过控制可控硅[1]导通时间,以此来调节灯泡亮度。此方案通过Multisim仿真及实际电路得到验证。
【Abstract】 Music signal can be divided into three frequency bands by using band-pass filters,then through the precision rectifier,it forms the DC current floating up and down with the signal,which can be compared with the staircase.In this way,the voltage comparator output signal is high time proportional to the signal so as to control the turn-on time of the thyristor and adjust the lamp brightness.The program has been simulated by Multisim and verified by the actual lantern circuit.The actual results prove consistent with the theory.
【关键词】 阶梯波;
带通滤波器;
精密整流器;
可控硅;
【Key words】 staircase; band-pass filters; precision rectifier; thyristor;
【Key words】 staircase; band-pass filters; precision rectifier; thyristor;
【基金】 “理论与实践相结合,加强工程技术概念的教学方法研究与实施”,项目编号:2010229
- 【文献出处】 电气电子教学学报 ,Journal of Electrical & Electronic Education , 编辑部邮箱 ,2012年S1期
- 【分类号】TM923;TP273
- 【被引频次】2
- 【下载频次】1011