节点文献

羧甲基纤维素钠取代度对蒽醌正极的影响

Effects of degree of substitution of carboxymethyl cellulose sodium on anthraquinone cathode

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 万君玲赵磊谢龙邵自强

【Author】 WAN Jun-ling1,ZHAO Lei2,XIE Long1,SHAO Zi-qiang1(1.School of Materials Science and Engineering,Beijing Institute of Technology,Beijing 100081,China;2.School of Chemical Engineering and Environment,Beijing Institute of Technology,Beijing 100081,China)

【机构】 北京理工大学材料科学与工程学院北京理工大学化工与环境学院

【摘要】 采用淤浆法制备水溶性粘结剂羧甲基纤维素钠(CMC),并进行红外光谱(FT-IR)、核磁氢谱(1H-NMR)和SEM分析。对蒽醌(AQ)正极进行了恒流充放电、循环伏安和交流阻抗等测试。以CMC为粘结剂的AQ电极,比容量和循环性能均比以PVDF为粘结剂的更高。以0.2 mA/cm2的电流密度在1.5~3.5 V循环,以高取代度(DS=1.23)的CMC-1为粘结剂的AQ/CMC-1电极首次和第50次循环的放电比容量分别为226.4 mAh/g和70.9 mAh/g。高取代度的CMC-1的电化学性能好于低取代度(DS=0.86)的CMC-2。

【Abstract】 Water-soluble binder carboxymethyl cellulose sodium(CMC)was synthesized by slurry process.The Fourier transform infrared(FT-IR),nuclear magnetic resonance(1H-NMR)and SEM analyses were taken.The 9,10-anthraquinone(AQ)electrodes was tested by galvanostatic discharge-charge,cyclic voltammetry and electrochemical impedance spectroscopy.The specific capacity and cycle performance of electrode using CMC as binder was higher than the one using PVDF.When cycled with the current density of 0.2 mA/cm2 in 1.5~3.5 V,the specific discharge capacity of AQ/CMC-1 electrode which was prepared with the binder CMC-1 which had high degree of substitution(DS=1.23)in the initial and 50th cycle was 226.4 mAh/g and 70.9 mAh/g,respectively.The electrochemical performance of CMC-1,which had a higher DS was superior to CMC-2 with a lower DS(DS=0.86).

  • 【分类号】TM912.9
  • 【被引频次】6
  • 【下载频次】158
节点文献中: 

本文链接的文献网络图示:

本文的引文网络