节点文献

小型深松施肥机变量施肥机构参数控制研究

Study and Control of the Structural Parameters for the Variable Fertilization of Small Subsoiling Fertilization Machine

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 梁文甲胡晓丽陈艳辉袁洪印

【Author】 LIANG Wen-jia et al(College of Engineering and Technology,Jilin Agricultural University,Changchun,Jilin 130118)

【机构】 吉林农业大学工程技术学院长春理工大学光电信息学院

【摘要】 [目的]为了提高化肥利用率,保护生态环境,促进农业可持续发展。[方法]选用一台4行深松施肥机,4种肥料,进行4组试验。每种肥料分别在不同的排肥轮长度和不同的转速下进行正交试验,用HMI调节转速,使步进电机按不同转速转动,带动排肥器排肥。[结果]在肥料一定、轮长不变的情况下,步进电机转速与机具前进速度之间存在线性关系。[结论]采用控制排肥轮长度和步进电机转速的方式来控制排肥量是切实可行的。

【Abstract】 [Objective] To improve fertilizer use efficiency,protect ecological environment,and promote sustainable agricultural development.[Method] With one four-row subsoiling fertilization machine and four kinds of fertilizer,four groups of experiment were carried out.Orthogonal experiments were conducted for each kind of fertilizer under different fertilizer wheel length and different rotate speed,the speed was adjusted by HMI so that the stepper motor can rotate at different speeds and drive the row fertilizer of fertilizer.[Result] Under the same fertilizer and the same roller length,there is a linear relationship between the stepper motor speed and machinery forward speed.[Conclusion] It is feasible to control the fertilization amount through controlling the length of fertilizer wheel and the stepper motor speed.

【基金】 吉林省财政厅项目(2528)——旱地保护性耕作全程机械化配套深松机具研究
  • 【文献出处】 安徽农业科学 ,Journal of Anhui Agricultural Sciences , 编辑部邮箱 ,2012年22期
  • 【分类号】S224.25
  • 【被引频次】5
  • 【下载频次】146
节点文献中: 

本文链接的文献网络图示:

本文的引文网络