节点文献

注浆成型法制备氧化铝陶瓷弯管

PREPARATION OF ALUMINIUM OXIDE CERAMIC-CURVED PIPE BY SLIP CASTING

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 伍协陈振华李富营

【Author】 Wu Xie,Cheng Zhenghua,Li Fuying(College of Materials & Engineering of Hunan University,Changsha 410082)

【机构】 湖南大学材料科学与工程学院

【摘要】 以氧化铝为主要原料,采用注浆成型法制备氧化铝陶瓷弯管。论文比较详细地研究了pH值、颗粒级配和有机粘结剂对产品性能的影响。结果表明:当pH值为1,粘结剂为2wt%获得的泥浆粘度最小;用颗粒大小4μm的100%α-Al2O3细粉制备的氧化铝陶瓷弯管气孔率最小、表观密度最大、显微结构最理想。

【Abstract】 Based on aluminium oxide as main raw material,aluminium oxide ceramic-curved pipe was prepared by slip casting.pH,particle grading and binder were reshearched on the performance of aluminium oxide ceramic-curved pipe in detail.The results showed that: When the pH is 1 and binder is 2wt%,the viscosity of mud is smallest.The particle grading is 4μm 100%α-Al2O3 powder which porosity is the smallest,apparent density is the biggest,the microstructure is the most ideal.

【关键词】 注浆成型氧化铝陶瓷弯管
【Key words】 Slip castingAluminium oxideCeramic-Curved pipe
【基金】 湖南省科技厅基金资助项目(2009FJ3113);长沙市科技局基金资助项目(K0902013-11);中央高校基本科研业务费资助项目(531107040033)
  • 【分类号】TQ174.75
  • 【被引频次】9
  • 【下载频次】518
节点文献中: 

本文链接的文献网络图示:

本文的引文网络