节点文献

永磁开关磁通直线电动机优化设计

Optimization of Linear Switched-Flux Permanent Magnet Motor

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 闵伟陈金涛诸自强朱煜张鸣段广洪

【Author】 MIN Wei1,2,CHEN Jin-tao2,ZHU Zi-qiang2,ZHU Yu1,ZHANG Ming1,DUAN Guang-hong1 (1.Tsinghua University,Beijing 100084,China;2.University of Sheffield,Sheffield S13JD,U.K.)

【机构】 清华大学谢菲尔德大学

【摘要】 采用基于有限元法的单参数优化方法分析了6/5和6/7动/定子极永磁开关磁通直线电动机的主要设计参数对推力的影响,最大化了其在固定铜耗下的推力。比较两种电机的优化结果,发现其参数优化值和最大推力基本相同,但6/5动/定子极电机的定子结构更为简单。随后采用基于遗传算法的全局优化对6/5动/定子极电机的单参数优化进行了验证。最后,通过对电机端部尺寸的优化,将6/5动/定子极电机齿槽力降低了40%。

【Abstract】 The 6/5 and 6/7 mover/stator pole linear switched-flux permanent magnet motors were firstly analyzed and optimized for maximum thrust force at a fixed copper loss by individual parameter optimization with finite element(FE) analysis.It is found that the optimization results of the 6/5 and 6/7 mover/stator pole motors are nearly the same while the 6/5 mover/stator pole motor has a more simple stator.Then the optimization results of the 6/5 mover/stator pole motor were validated by a global optimization with genetic algorithm.Finally,the peak-to-peak value of the cogging force was reduced by 40% by optimizing the slot opening and tooth width associated with the end teeth.

【基金】 国家高技术研究发展计划项目(863计划)(2009AA04Z148)
  • 【文献出处】 微特电机 ,Small & Special Electrical Machines , 编辑部邮箱 ,2011年06期
  • 【分类号】TM359.4
  • 【被引频次】7
  • 【下载频次】271
节点文献中: 

本文链接的文献网络图示:

本文的引文网络