【摘要】 莱钢265m2烧结机布料过程存在给料不均、料面不平整、偏析不合理等问题,通过修改梭式布料小车行程,改造小矿槽仓体,采用耐磨陶瓷料仓衬板和六辊布料器,篦条两端厚度加大为35mm,并将隔热垫加厚3mm,增加平料器、破板结装置,在圆辊给料机下侧安装监控设备等措施,改善了布料效果,混合料粒度偏析合理,烧结矿各项经济技术指标稳步提升。更多还原

【Abstract】 Some problems existed in the distributing system for 265 m2 sinter machine in Laiwu Steel,such as asymmetric feeding,not flat material surface and unreasonable segregation.Through modifying the journey of the shuttle carriage,transforming the mixed material hopper by wear-resistant ceramic bin liner,adopting six-roller distributor,increasing the thickness of both ends of the grate bar to 35 mm and the thickness of the heat insulation pad by 3 mm,setting cut-off plate and punching device on the surface of material bed and installing monitor equipment in the next round roll feeder side etc,the distributing effects were improved.Then mix particle segregation was reasonable and the technological and economic indexes of sinter increased steadily.更多还原