节点文献

复合矿物纤维增强制动衬片的力学及摩擦磨损性能研究

Study on Mechanical Properties and Friction and Wear Properties of Brake Lining Reinforced with Composite Mineral Fiber

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 杨亚洲佟金蒋蔓徐杰赵丽萍

【Author】 YANG Ya-zhou et al(College of Engineering and Technology,Jilin Agricultural University,Changchun,Jilin 130118)

【机构】 吉林农业大学工程技术学院吉林大学工程仿生教育部重点实验室吉林大学化学学院装甲兵技术学院基础部

【摘要】 为了从环保角度设计新型摩擦材料,选用复合矿物纤维和无公害填料,采用热压工艺制备制动衬片,并通过力学性能、摩擦磨损性能对其进行表征。结果显示,摩擦材料的冲击强度为2 383.9 J/m2,洛氏硬度值为71.3;摩擦因数随摩擦盘温度的升高呈下降趋势,摩擦因数稳定,且偏差较小,衰退率为38.4%;比磨损速率随盘温升高则呈上升趋势。复合矿物纤维增强制动衬片的力学性能及摩擦磨损指标均已达到国家标准。

【Abstract】 In order to prepare brake lining to develop a new friction material from the protecting environment,the composite mineral fiber and some filler without environmental pollution were selected and prepared by using hot press method.The mechanical properties,friction and wear properties of the composites were also investigated.The results showed that the impact strength was 2 383.9 J/m2 and the Rockwell hardness was 71.3.The friction coefficient decreased with the disc temperature increasing,it was steady and its deviation was low.The deterioration rate of the friction materials was 38.4%.The specific wear rate was increased with the temperature elevating.It was concluded that the mechanical properties and the friction and wear properties of the friction materials satisfied the requirement of National standard.

【基金】 国家杰出青年科学基金项目(50025516);吉林省自然科学基金项目(20070518);吉林农业大学科学研究启动基金项目(2007035)
  • 【文献出处】 宁夏农林科技 ,Ningxia Journal of Agriculture and Forestry Science and Technology , 编辑部邮箱 ,2011年11期
  • 【分类号】U463.55;TH117.1
  • 【被引频次】3
  • 【下载频次】109
节点文献中: 

本文链接的文献网络图示:

本文的引文网络