节点文献

喷射电沉积快速成形金属零件新技术研究

A New Technique for Rapid Prototyping of Metal Parts by Jet-deposition

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 陈斐黄因慧田宗军刘志东沈理达王桂峰

【Author】 Chen Fei,Huang Yinhui,Tian Zongjun,Liu Zhidong,Shen Lida,Wang Guifeng(Nanjing University of Aeronautics and Astronautics,Nanjing 210016)

【机构】 南京航空航天大学机电学院

【摘要】 喷射电沉积快速成形技术将硬质粒子摩擦法和模板辅助电沉积引入喷射电沉积,实现了对三维实体零件的简化快速制造。加工过程中,硬质粒子不断挤压、摩擦阴极表面,能有效地去除沉积层表面的吸附气泡和积瘤,保证了电沉积层表面的平整和光滑。二维模板限制了沉积范围,保证了加工精度,使得电沉积可以以更高的速率进行。试验中,采用了优化的工艺参数,选用厚度0.3 mm的环氧树脂模板,在电压为40 V、喷射流速为150 L/h、温度为30℃的工艺条件下成功制备了空间异形结构铜零件。

【Abstract】 Rapid prototyping of metal parts is realized by jet-deposition combined with template technique,friction technique and jet-electrodeposition,and it made the manufacturing of metal parts easier and quicker.In the process,the polishing of hard particles can effectively remove nodules and air bubbles,which leads to a brightening and smoothing deposition.The template limited the area of electrodeposition,made sure of the precision and improved the speed.In the experiment,optimized technological parameters were used.Copper parts with complex structure were produced successfully by 0.3 millimeters-thick epoxy resin templates at the jet velocity of 150 L/h,voltage of 40 V and temperature of 30 ℃.

【关键词】 喷射电沉积模板快速成型
【Key words】 jet electrodepositiontemplaterapid prototypingcopper
【基金】 国家自然科学基金项目(50575104);江苏省自然科学基金项目(BK2009375)资助
  • 【文献出处】 机械科学与技术 ,Mechanical Science and Technology for Aerospace Engineering , 编辑部邮箱 ,2011年08期
  • 【分类号】TG661
  • 【被引频次】6
  • 【下载频次】236
节点文献中: 

本文链接的文献网络图示:

本文的引文网络