节点文献

Cu对6082铝合金加热过程中微观组织的影响

Effects of copper addition on microstructure of 6082 aluminium alloy in heating process

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 杨丽丽金曼邵光杰夏朝峰张明

【Author】 YANG Li-li,JIN Man,SHAO Guang-jie,XIA Chao-feng,ZHANG Ming(School of Materials Science and Engineering,Shanghai University,Shanghai 200072,China)

【机构】 上海大学材料科学与工程学院

【摘要】 研究了添加Cu0.60%对6082铝合金连续加热过程中微观组织变化的影响。结果表明,含0.6%Cu的6082铝合金在50℃到450℃内出现4个放热峰,且放热峰的中心温度均低于不含Cu的6082铝合金放热峰的中心温度。根据透射电镜及三维原子探针的观察可知,元素Cu使6082铝合金连续加热过程中,析出相的析出时间缩短,析出温度下降,析出相的析出数量增加。

【Abstract】 Effect of copper addition on the microstructure of Al-Mg-Si(6082) alloy in the continuous heating process was investigated by means of DSC,TEM and 3DAP.The DSC results show that there are four exothermic peaks from 50 ℃ to 450 ℃ in Al-Mg-Si-0.6%Cu alloy,and the exothermic peak in Al-Mg-Si-0.6%Cu alloy occurs more early than that in Al-Mg-Si alloy.Based on the observation of TEM and 3DAP,it is found that copper reducs the time to form the precipitates in 6082 aluminium alloy.The amount of precipitates increases in Al-Mg-Si-0.6%Cu alloy compared with that in 6082 alloy in the continuous heating process.

【关键词】 6082铝合金DSC3DAPTEM
【Key words】 6082 aluminium alloyDSCthree dimensional atom probe(3DAP)TEM
【基金】 国家自然基金资助项目(50801044);教育部财政部第一类特色专业及上海市教委高地建设项目
  • 【文献出处】 材料热处理学报 ,Transactions of Materials and Heat Treatment , 编辑部邮箱 ,2011年07期
  • 【分类号】TG146.21
  • 【被引频次】9
  • 【下载频次】361
节点文献中: 

本文链接的文献网络图示:

本文的引文网络