节点文献

煤基碳分子筛的制备及CH4/N2分离性能研究

Preparation of coal-based carbon molecular sieve and its application effects in CH4/N2 separation

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张进华车永芳李兰廷梁大明段超何正刚

【Author】 ZHANG Jin-hua1,2,CHE Yong-fang1,2,LI Lan-ting1,2,LIANG Da-ming1,2,DUAN Chao1,2,HE Zheng-gang3(1.Beijing Research Institute of Coal Chemistry,China Coal Research Institute,Beijing 100013,China;(2.State Key Laboratory of Coal Mining and Clean Utilization(China Coal Research Institute),Beijing 100013,China;3.Beijing Tiandi-Marco Electro-Hydraulic Control System Co.,Ltd.,Beijing100013,china)

【机构】 煤炭科学研究总院北京煤化工研究分院煤炭资源开采与洁净利用国家重点实验室(煤炭科学研究总院)北京天地玛珂电液控制系统有限公司

【摘要】 以煤为原料,通过气相碳沉积法制备了CH4/N2变压吸附分离用碳分子筛,研究了苯沉积量对碳分子筛吸附性能的影响。用液氮吸附(77 K)、扫描电镜对碳分子筛孔结构及表面形貌进行了表征,结果表明:制备的碳分子筛(CMS-1)平衡分离系数大于5,比表面积SBET=251.5 m2/g,微孔孔容Vm=0.1178 mL/g,孔径主要分布在0.35~2 nm,能满足CH4/N2变压吸附分离要求。

【Abstract】 Take coal as raw material to produce carbon molecular sieves with the method of vapor carbon deposition,which is used to concentrate methane from CH4/N2 mixtures.The effect of benzene deposition amount on the adsorption properties was studied.The pore structure of carbon molecular sieves was characterized by liquid nitrogen adsorption method(77 K).Environmental scanning electron microscopy(ESEM) was used to observe the surface morphology.The experimental results show that equilibrium separation factor of CMS-1 is greater than five,CMS-1 can meet the CH4/N2 PSA separation requirement,its BET specific surface area is 251.5 m2/g,the micro pore volume is 0.1178 cm3/g and its pore diameter size distributes mostly from 0.35 nm to 2.00 nm.

  • 【文献出处】 洁净煤技术 ,Clean Coal Technology , 编辑部邮箱 ,2011年02期
  • 【分类号】TD84
  • 【被引频次】16
  • 【下载频次】420
节点文献中: 

本文链接的文献网络图示:

本文的引文网络