节点文献

基于Pro/E和ANSYS的LED灯热设计

Thermal Analysis of LED Lamps Based on Pro/E and ANSYS

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 程筱军李菊华

【Author】 CHENG Xiao-jun,LI Ju-hua(School of Electronic Information,Hangzhou Dianzi University,Hangzhou Zhejiang 310018,China)

【机构】 杭州电子科技大学电子信息学院

【摘要】 发光二极管作为第四代照明光源,随着功率的不断增大,散热问题成为大功率LED灯具实现产业化亟待解决的关键问题之一。该文综合ANSYS和Pro/E两个软件的优势进行LED热仿真。在Pro/E中建立灯具模型,导入ANSYS后通过优化模型、网格划分、施加载荷和边界条件,求解可以得到LED灯的温度场分布。运用该方法可对复杂LED灯具进行了热仿真,得到了一款散热器的最大功率容量,并分析了芯片排布等因素对散热的影响。

【Abstract】 LED is the fourth generation light source,but heat dissipation is one of the key problems with the increasing power which will influence the high-power LED to popularization.ANSYS and Pro/E is combined to realize LED thermal simulation.LED structure is modeled in Pro/E and imported into ANSYS.After model optimization,meshing,loads applying,and boundary and solving,the temperature distribution of LED lamp will obtained.This method is easier for the thermal simulation of the complex model.In this paper,the maximum power capacity of a type of heat sink is analyzed,the chip arrangement and other factors on the heat dissipation effects is also discussed.

【关键词】 大功率发光二极管破衣有限元分析热设计
【Key words】 high-power LEDPro/EANSYSthermal design
【基金】 浙江省自然科学基金面上资助项目(Y1110992)
  • 【文献出处】 杭州电子科技大学学报 ,Journal of Hangzhou Dianzi University , 编辑部邮箱 ,2011年05期
  • 【分类号】TN312.8
  • 【被引频次】5
  • 【下载频次】283
节点文献中: 

本文链接的文献网络图示:

本文的引文网络