节点文献

Al2O3-ZrO2复相陶瓷的超塑压缩变形织构

Deformation texture of alumina-zirconia composites prepared by superplastic compressive deformation

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李柏茹

【Author】 LI Bairu1,2(1.College of Materials Science & Engineering,Heilongjiang Institute of Science & Technology,Harbin 150027,China;2.College of Materials Science & Engineering,Harbin Institute of Technology,Harbin 150001,China)

【机构】 黑龙江科技学院材料科学与工程学院哈尔滨工业大学材料科学与工程学院

【摘要】 为了验证Al2O3-ZrO2复相陶瓷压缩变形后是否出现织构,采用X射线衍射(XRD)、极图和扫描电镜(SEM)对Al2O3-ZrO2复相陶瓷超塑压缩变形后的组织进行了分析。结果表明:复相陶瓷压缩变形后,Al2O3晶粒在(110)、(113)和(300)晶面出现择优取向,织构强度高达6.21,而ZrO2取向不明显。

【Abstract】 This paper is an attempt to verify whether there occurs the texture in alumina-zirconia composites subjected to compressive deformation,by analyzing the microstructure of alumina-zirconia composites prepared by superplastic compressive deformation by means of X-ray diffraction(XRD),pole-figure and scanning electron microscope(SEM).Results show that compressive deformation is followed by preferred orientation in alumina crystal grains in(110),(113) and(300) crystal plane,with the maximum degree of texture of 6.21 times random,and without any obvious grain orientation in zirconia.

  • 【文献出处】 黑龙江科技学院学报 ,Journal of Heilongjiang Institute of Science and Technology , 编辑部邮箱 ,2011年01期
  • 【分类号】TQ174.1
  • 【下载频次】81
节点文献中: 

本文链接的文献网络图示:

本文的引文网络