节点文献

烧结型多孔管管内流动沸腾传热数值模拟

Numerical Simulation of Flow Boiling Heat Transfer in Sintered Surface Porous Tubing

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 韩坤刘阿龙彭东辉孙定芳王经

【Author】 HAN Kun1,LIU Along1,PENG Donghui1,SUN Dingfang1,WANG Jing2 (1Shanghai Research Institute of Chemical Industry,Shanghai 200062,China;2Shanghai Jiaotong University,Shanghai 200030,China)

【机构】 上海化工研究院上海交通大学

【摘要】 建立了烧结型表面多孔管多孔层的理论模型,应用Fluent软件对去离子水在烧结型表面多孔管和光滑管竖直管内的流动沸腾进行数值模拟,得到了不同流速下的气相体积分布云图和压力场云图,并利用场协同原理分析了管内的速度、温度场。结果表明,烧结型表面多孔管具有良好的强化沸腾传热性能,同时并未大幅度增加管内压力降。此外还分析了不同体积流速对沸腾汽化量的影响,研究表明,对于同一管型,管内流速越小,汽化量越大。

【Abstract】 A theoretical model for the porous layer of sintered porous surface tubing(SPST) was established to simulate the flow boiling performances of cooling water in SPST and smooth tube based on Fluent software;and the cloud figures of gas volume distribution and pressure were got under different fluid velocities,including analysis of the velocity and the temperature by field synergy principle.The results show that SPST can enhance the heat flux and influence the pressure drop not too much.Analyzing different pipe flow influences on the vaporization proves the smaller the pipe flow,the greater the vaporization.

【基金】 上海市经委重大装备专项(ZX08058);上海市科委节能减排项目(09dz1203200)
  • 【文献出处】 化工机械 ,Chemical Engineering & Machinery , 编辑部邮箱 ,2011年01期
  • 【分类号】TK124
  • 【被引频次】5
  • 【下载频次】352
节点文献中: 

本文链接的文献网络图示:

本文的引文网络