节点文献

一种非离子型自乳化水性环氧树脂的制备与性能

Preparation and properties for a non-ionic self-emulsifying waterborne epoxy resin

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 明杜; 舒武炳;

【Author】 Ming Du,Shu Wubing (Department of Applied Chemistry,College of Science,Northwestern Polytechnical University,Xi’an 710129,China)

【机构】 西北工业大学理学院应用化学系;

【摘要】 以甲基四氢苯酐(MTHPA)和聚乙二醇600(PEG600)为原料,合成了一种双端羧基化合物(MTHPA-PEG600-MTHPA);然后将其与环氧树脂(EP)反应,制备出一种非离子型水性EP。结果表明:该水性EP可与任何比例的水在搅拌条件下配成水乳液,并且其经3 000 r/min离心分离30 min后无分层现象,说明其稳定性较好;该水性EP的平均粒径为77 nm,其胶膜的铅笔硬度为3H,并且胶膜的附着力、耐水性、耐酸性和耐溶剂性等俱佳。

【Abstract】 With methyl tetrahydrophthalic anhydride(MTHPA) and polyethylene glycol 600(PEG600) as raw materials,a two-terminal carboxyl compound(MTHPA-PEG600-MTHPA) was synthesized.Then a non-ionic waterborne EP(epoxy resin) was prepared by polymerization between MTHPA-PEG600-MTHPA and EP.The results showed that the water emulsions with better stability between the waterborne EP and any proportion water could be made by mix round because the emulsion stratification after 3 000 r/min for 30 min wasn’t generated.The waterborne EP film with average diameter at 77 nm and pencil hardness at 3H hat better adhesion,water resistance,acid resistance and solvent resistance.

  • 【文献出处】 中国胶粘剂 ,China Adhesives , 编辑部邮箱 ,2011年09期
  • 【分类号】TQ323.5
  • 【被引频次】22
  • 【下载频次】450
节点文献中: 

本文链接的文献网络图示:

本文的引文网络