节点文献

多孔氧化铝模板的制备研究

Study on Preparation of Nano-porous Anodic Alumina Membrane

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 许宁刘旭俐陈嘉琳陈小芳

【Author】 XU Ning,LIU Xuli,CHEN Jialin,CHEN Xiaofang (College of Materials Science and Engineering,Fuzhou University,Fuzhou 350018)

【机构】 福州大学材料科学与工程学院

【摘要】 以草酸为电解液,采用二次阳极氧化法制备多孔有序氧化铝模板,研究了氧化电压、电解液浓度、去一次氧化膜时间和二次阳极氧化时间对多孔氧化铝膜结构的影响。结果表明,退火后在60V电压、0.6mol/L的草酸溶液中、去一次阳极氧化膜5h、二次阳极氧化15h制备的膜结构孔洞均匀有序、孔径达80nm、孔密度达8.2×109个/cm2。

【Abstract】 Ordered porous anodic alumina membranes were fabricated by two-step anodic oxidation in oxalic acid solution.Influence of oxidation voltage on alumina oxide membrane were studied,oxalic acid concentration,time of eroding oxide of the first step and oxidation time of the second step were also discussed.The result showed that highly ordered anodic aluminum oxide membrane with diameters of 80nm and pore density of 8.2×109 had been fabricated under the condition of 60V of voltage,0.6mol/L of oxalic acid,5h of the first anodic oxidation and 15h of the second anodic oxidation.

【基金】 福建省科技厅重大陶瓷专项基金(2005HZ02-3);福州大学科技发展基金(2008-XQ-02);福州大学本科生科研实践项目(12180)
  • 【分类号】TB383.1
  • 【被引频次】3
  • 【下载频次】359
节点文献中: 

本文链接的文献网络图示:

本文的引文网络