节点文献
分步滴定法制备YAG荧光粉
Preparation of YAG∶Ce Yellow Phosphor by Step-by-Step Precipitation Method
【摘要】 在室温下,采用分步滴定法得到高亮度LED所用的Y3-x-yGdxCeyAl5O12荧光粉,并以0.1mol/L的碳酸氢铵和氨水为沉淀剂,将其分步滴入金属盐离子混合液中,研究了s杂Gd离子对荧光粉发光性能的影响。结果表明,以Ce为激活中心,最佳掺量为0.06,加入助熔剂后,荧光粉的发光性能提高了50%左右;随着Gd3+取代量的增加,荧光粉样品发射光谱的峰值波长可红移5~10nm,同时,Gd3+对发光中心Ce3+的影响增强,当取代浓度x为0.1时发光最强。XRD测试结果表明Gd离子的s入对YAG相的形成并没有影响。
【Abstract】 At room temperature,the high-brightness LED with Y3-x-yGdxCeyAl5O12yellow phosphor was obtained by step-by-step precipitation method,and using 0.1mol/L ammonium bicarbonate and aqueous ammonia as the precipitation agent.The effect of doping Gd3+ ions in Y3-x-yGdxCeyAl5O12 phosphor on luminescent enhaucement was studied.The results show that the relative intensity increases with increasing content of Ce,and achieving the maximum value is y=0.06,By doping flux,phosphor light-emitting performance improves over 50 percent.the peak wavelength changes about 5~10nm with the addition of Gd3+,With the increase of replacing quantity,the influence of Gd3+ on Ce3+ is also enhanced.Luminescent intensity of phosphor achieved is highest when x=0.1.The results of XRD shows that the phase of YAG doesn′t change when Gd3+ doping.
【Key words】 Luminescence; temperature dependence; phosphor; spectrum adjustment;
- 【文献出处】 材料导报 ,Materials Review , 编辑部邮箱 ,2011年08期
- 【分类号】O482.31
- 【被引频次】1
- 【下载频次】127