节点文献
比较2种溅射方法镀制的氧化硅薄膜
Comparison of reactive magnetron and reactive ion-beam sputtering for deposition of silicon oxide thin film
【摘要】 比较了磁控反应溅射(RMS)法与离子束反应溅射(RIBS)法沉积得到的氧化硅薄膜的光学特性,并确定了其对折射率n、消光系数k、沉积速率和混合工作气体Ar/O2中氧含量的依赖性关系。工作气体中O2含量大于15%时通过RMS法沉积的氧化硅薄膜在0.63μm波长折射率约为1.52~1.55,消光系数低于10-5。当O2含量在80%以上时RIBS方法沉积氧化硅薄膜的折射率n=1.52~1.6,消光系数低于10-5。用RMS沉积SiO2薄膜,当氧气量超过15%时发生反应模式,此时沉积速率下降近5倍。而用RIBS时,沉积速率并不依赖氧气在混合工作气体中的含量。
【Abstract】 The optical characteristics of silicon oxide thin films deposited by the reactive magnetron(RMS) method were compared to those deposited by the reactive ion-beam sputtering(RIBS) method.Dependence of refractive index n,extinction coefficient k and deposition rate on oxygen concentration in Ar/O2 working gas mixture were determined.Silicon oxide films with the refractive index of 1.52~1.55 and extinction coefficient less 10-5 at the wavelength of 0.63 μm were deposited by RMS method with O2 content greater than 15% of working gas mixture.Silicon oxide films with refractive index of 1.52~1.6 and extinction coefficient less 10-5 were deposited by RIBS method with O2 content more than 80% of working gas mixture.In the case of RMS method,the SiO2 film deposition rate decreases almost 5 times when the process is switched to the reactive mode(more than 15% O2).On the contrary,in the case of RIBS,the deposition rate does not depend on the O2 concentration in the working gas mixture.
【Key words】 reactive magnetron sputtering; reactive ion-beam sputtering; refractive index; extinction coefficient;
- 【文献出处】 应用光学 ,Journal of Applied Optics , 编辑部邮箱 ,2010年05期
- 【分类号】TN305.92
- 【被引频次】1
- 【下载频次】211