【摘要】 为使多晶硅纳米薄膜良好的压阻特性在MEMS(微机电系统)压阻传感器中得到有效应用,在设计牺牲层结构压力传感器芯片中探索性地采用了多晶硅纳米薄膜作为应变电阻,并给出这种传感器的设计方法。分析了牺牲层结构弹性膜片的应力分布对传感器灵敏度的影响,优化设计了量程为0~0.2 MPa多晶硅纳米膜压力传感器芯片的结构参数。有限元法仿真结果表明:在保证传感器灵敏度大于50 mV/(MPa.V)的前提下,零点温漂系数可小于1×10-3FS/℃;灵敏度温漂(无电路补偿)可小于1×10-3FS/℃.为高灵敏、低温漂、低成本的高温压力传感器集成化发展提供了一条可行途径。更多还原

【Abstract】 In order to develop MEMS(micro electro mechanical system) strain sensors effectively using polysilicon nanofilms with favorable piezoresistive properties,the strain resistors made of the films were exploringly applied to the pressure sensor chips with the sacrifice layer structure,and the method of designing this kind of pressure sensor was introduced.Based on the analysis of the influence of stress distribution of sensing diaphragms with sacrifice layer structure on the sensitivity of sensors,the structure parameters were designed and optimized of polysilicon nanofilm pressure sensor chip with from 0 to 0.2 MPa measuring range.Finite element simulation results show that premising sensitivity of the sensor is more than 50 mV/MPa.V,zero drift coefficient can be less than 1×10-3 FS/℃;sensitivity drift(no compensation) can be less than 1×10-3 FS/℃.A feasible way was provided for the development of high-sensitivity,low temperature drift,low-cost high temperature integrated pressure sensor.更多还原