节点文献

奥氏体化温度对X80管线钢组织和力学性能的影响

Effect of austenizing temperature on microstructure and mechanical properties of pipeline steel X80

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 牛靖刘迎来齐丽华吉玲康冯耀荣张建勋

【Author】 NIU Jing1,2,LIU Ying-lai1,QI Li-hua1,2,JI Ling-kang1,FENG Yao-rong1,ZHANG Jian-xun2(1.Tubular Goods Research Center of China National Petrolenm Corporation(CNPC),Xi’an 710065,China;2.School of Materials Science and Engineering,Xi’an Jiaotong University,Xi’an 710049,China)

【机构】 中国石油天然气集团公司管材研究所西安交通大学材料学院

【摘要】 研究了X80钢在不同奥氏体化温度下调质处理后的力学性能和组织变化。结果表明,奥氏体化温度为1150℃时,X80钢的奥氏体晶粒严重粗化,导致粗板条贝氏体铁素体的产生,致使X80钢的强度升高和韧性严重降低;通过奥氏体化温度为850℃、950℃的淬火处理,同时辅以650℃的回火处理,可以使X80钢获得以细小针状铁素体为主的组织,从而获得良好的强韧性配合。

【Abstract】 The mechanical properties and microstructure of X80 pipeline steel after quenching at different austenizing temperatures,and tempering treatment were investigated.The results show that austenite grain of the X80 steel austenized at 1150 ℃ is coarsened,resulting in thicker lath bainite ferrite after quenching and tempering treatment,which increases the strength and descreases greatly the toughness of X80 steel.Quenching at 850 ℃-950 ℃ and tempering at 650 ℃,large amount of fine acicular ferrite forms in X80 steel,achieving high strength and toughness.

【基金】 中国石油天然气集团公司重大科技专项(6990-HT-XEX-03-(2008)-0137)
  • 【文献出处】 材料热处理学报 ,Transactions of Materials and Heat Treatment , 编辑部邮箱 ,2010年05期
  • 【分类号】TG142.1
  • 【被引频次】23
  • 【下载频次】699
节点文献中: 

本文链接的文献网络图示:

本文的引文网络