节点文献

基于0.6μm全差分运算放大器的设计

Based on 0.6 μm Fully Differential Operational Amplifier Design

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 康怡曹红卫罗广孝

【Author】 KANG-Yi,CAO Hong-wei,LUO Guang-xiao(Department of Electronic and communication Engineering North China Electric Power University,Baoding 071003,China)

【机构】 华北电力大学电子与通信工程系

【摘要】 研究了一种全差分高增益、低功耗的CMOS运算放大器,采用折叠共源共栅结构、开关式共模反馈以及宽摆幅偏置电路。基于CSMC 0.6μm CMOS工艺,采用HSPICE软件对电路进行仿真。对各性能参数的仿真结果表明,该电路在输入2.5 V电压的情况下,此电路的开环直流增益为80 dB,相位裕度80°,单位增益带宽74 MHz,具有较高的增益,而且功耗小于2 mW。

【Abstract】 Study of a fully differential high-gain,low-power CMOS op-amp,It folded cascode structure,switch-mode common-mode feedback,as well as wide-swing bias circuit.Based on CSMC 0.6 μm CMOS process,using HSPICE circuit simulation software.The various performance parameters of the simulation results show that the circuit in the input voltage of 2.5 V,this circuit is open-loop DC gain of 80 dB,phase margin 80°,the unit-gain bandwidth of 74 MHz,with a high gain,and the power of small 2 mW.

【关键词】 全差分折叠共源共栅高增益
【Key words】 Fully differentialfoldingcascodehigh-gain
  • 【文献出处】 核电子学与探测技术 ,Nuclear Electronics & Detection Technology , 编辑部邮箱 ,2010年10期
  • 【分类号】TN722.77
  • 【被引频次】3
  • 【下载频次】303
节点文献中: 

本文链接的文献网络图示:

本文的引文网络