节点文献

连续退火冷却速率对热镀锌双相钢DP780屈服平台的影响

Effect of Continuous Annealing Cooling Rate on Yield Point Elongation of Continuous Galvanizing DP780 Steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 鲍成人李众谭谨峰邸洪双潘恩宝

【Author】 BAO Cheng-ren1,LI Zhong1,TAN Jin-feng1,DI Hong-shuang2,PAN En-bao2(1.Cold Rolling Operation Department,Shou Gang Jing Tang United Iron and Steel Co.,Ltd.,Tangshan 063200,Hebei,China;2.The State Key Lab of Rolling and Automation, Northeastern University,Shenyang 110004,Liaoning,China)

【机构】 首钢京唐钢铁联合有限责任公司冷轧作业部东北大学轧制技术及连轧自动化国家重点实验室

【摘要】 采用光亮连续退火模拟试验机研究了热镀锌双相钢DP780在连续退火中不同冷却速率对其组织和屈服现象的影响。试验结果表明:随着冷却速率的提高,组织中马氏体含量增加,晶粒尺寸减小。当冷速低于12℃/s时,应力应变曲线出现屈服平台;当冷速大于12℃/s时,应力应变曲线呈现连续屈服。冷速12℃/s为该钢种出现屈服平台的临界冷却速率。

【Abstract】 With bright continuous annealing simulator,the microstructure and yield phenomenon of continuous galvanizing DP780 steel treated with different cooling rates were investigated.The results show that fraction of martensite increases and the size of gains decreases with increasing cooling rate.When the cooling rate is below 12℃/s,the curves of stress-strain of tested steel shows yield point elongation;when cooling rate is above 12℃/s,the curves shows no yield point elongation.Thus,the cooling rate of 12℃/s is the intercritical cooling rate for obtaining yield point elongation of the continuous galvanizing DP780 steel.

  • 【分类号】TG156.2
  • 【被引频次】7
  • 【下载频次】549
节点文献中: 

本文链接的文献网络图示:

本文的引文网络