节点文献

碳及电磁搅拌对AZ91D合金显微组织的影响

Influence of Carbon Powder and Electromagnetic Stirring on the Microstructure of AZ91D Alloy

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张晶唐靖林齐祥超曾大本

【Author】 ZHANG Jing1,TANG Jing-lin1,2,QI Xiang-chao1,3,ZENG Da-ben1(1.Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China;2.Key Lab.for Advanced Mater.Processing Technology Ministry of Education,Beijing 100084,China;3.SinoSteel Corporation,Beijing 100080,China)

【机构】 清华大学机械工程系先进成形制造教育部重点实验室中国中钢集团公司

【摘要】 研究了纳米级活性碳粉及电磁搅拌对AZ91D合金晶粒组织的影响。结果表明,当碳粉添加量大于0.1%时,细化效果显著,晶粒尺寸100μm左右,约为重熔试样晶粒尺寸的30%,且随添加量增加,碳对晶粒细化的效果趋于稳定;加电磁搅拌后,合金组织趋于均匀,β相在晶界上呈连续网状均匀分布。加碳0.1%并进行电磁搅拌可使AZ91D合金晶粒细小圆整,尺寸达55μm左右,形状因子约0.85。

【Abstract】 The influence of carbon powder and electromagnetic stirring process on the microstructure of AZ91D alloy were investigated.The results show that carbon powder has certain effect on the grain refinement of AZ91D alloy.Especially with the addition of 0.1 wt% or more carbon powder,the grain size is about 100 μm,which is thirty percent of that in the original one.The β phase is more distributed along the grain boundaries after electromagnetic stirring.The complex processing of melt treatment and electromagnetic stirring make the grain of AZ91D alloy much finer and spheroider.After 0.1% carbon powder additive and electromagnetic stirring,the grain size is about 55 μm,and the shape factor is about 0.85.

  • 【文献出处】 铸造技术 ,Foundry Technology , 编辑部邮箱 ,2009年08期
  • 【分类号】TG146.22
  • 【被引频次】3
  • 【下载频次】91
节点文献中: 

本文链接的文献网络图示:

本文的引文网络