【摘要】 为了研究剪胀角ψ对边坡稳定性的影响,利用FLAC3D软件建立均质边坡模型,分析不同工况下ψ与安全系数F和滑动面之间的关系。研究结果表明:无坡顶超载p时,随着ψ的增大,F表现出先增大后减小的二次抛物线样式,滑动面上缘与坡顶的距离越来越小;随着内摩擦角φ的增大,由关联与非关联流动法则得到的安全系数的差值ΔFψc-n同样符合二次抛物线规律;有坡顶超载p时,随着p的增大,由非关联流动法则得到的F逐渐减小;内摩擦角φ增大引起ψ对F的影响不断滞后;p越大,滑动面越陡,上缘越靠近坡顶。更多还原

【Abstract】 In order to study the effect of dilation angle ψ to the stability of slope, a numerical model was founded in plane strain mode by FLAC3D software for homogeneous soil slope.The safety factor and slip plane were obtained for different dilation angles, and the relationships among dilation angle, safety factor and slip plane were analyzed in different situations.The results show that in the situation with over-load p on the upper surface of slope, with the increase of dilation angle, relationship between safety factor and dilation angle presents the discipline like parabola curve, first increases and then decreases, and the distance between upper vertex and top of slope becomes smaller;difference ΔF ψ c-n between the safety factor of associated flow and non-associated flow presents the discipline like parabola curve with the increase of friction angle.In the situation with over-load p on the upper surface of slope, with the increase of p, F from non-associated flow reduces gradually, and the effect of dilation angle on the safety factor is lagged with the increase of friction angle φ .Slip plane becomes steeper with the upper vertex coming closer to the top of slope.更多还原