节点文献

提高CPE机组无缝钢管成材率的研究

Raising production yield of CPE seamless pipe hot rolling mill

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 杭乃勤陈鼎勋王伯文刘升段家田康志勇

【Author】 Hang Naiqin1,Chen Dingxun1,Wang Bowen1,Liu Sheng1,Duan Jiatian2,Kang Zhiyong2(1.College of Materials Science and Metallurgical Engineering,Wuhan University of Science and Technology,Wuhan 430081,China;2.Hanyang Steel Pipe Rolling Plant,Wuhan Iron and Steel Corporation,Wuhan 430035,China)

【机构】 武汉科技大学材料与冶金学院武钢集团汉阳钢管厂

【摘要】 通过分析CPE机组的生产工艺,得出切损是导致无缝钢管成材率低的主要原因。针对现场工艺及设备存在的问题,对定径、张力减径变形制度进行优化,对顶管缩口设备、顶管后切头方法进行改进。改进后的工艺减少张力减径增厚端的长度,减少顶管后的钢管切头,提高分切精度,因而降低切损,使机组全年综合成材率提高8%。

【Abstract】 With the analysis of CPE mill technology,this paper concludes that cutting wastage results in the low production yield of seamless steel pipe.In light of the problems arising from the field,the sizing and diameter reduction deformation system,pipe jacking device,and cutting method are improved,after which pipe end cutting is reduced,split accuracy is improved,length of pipe end upset during stretch reduction has decreased.As a result,cutting wastage is reduced,and the yearly production yield has risen by 8%.

【关键词】 CPE机组无缝钢管增厚端成材率
【Key words】 CPE millseamless steel pipepipe end upsetproduction yield
  • 【文献出处】 武汉科技大学学报 ,Journal of Wuhan University of Science and Technology , 编辑部邮箱 ,2009年05期
  • 【分类号】TG333.8
  • 【被引频次】4
  • 【下载频次】114
节点文献中: 

本文链接的文献网络图示:

本文的引文网络