节点文献

工业纯铁锻造过程中“红脆”现象的相图分析

Phase Chart Analysis of "Red Brittleness" Phenomenon in the Industrial Pure Iron Forging

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 宗斌王二平魏建忠

【Author】 ZONG Bin,WANG Er-ping,WEI Jian-zhong(College of Materials Science and Engineering,Beijing University of Technology,Beijing 100022,China)

【机构】 北京工业大学材料学院

【摘要】 通过相图分析可知,奥氏体中的硫的固溶度随着温度急剧降低。如果不采取有效的消除措施,在工业纯铁的锻造过程中,由于过量硫元素的存在,在一个特定温度范围内,纯铁处于固-液两相区。因此,会造成奥氏体晶界位置存在液态薄膜而降低晶粒之间的结合能力,出现所谓的"红脆"现象。有关分析,可以作为实践教学过程中有关相图的应用和重要性的一个生动事例。

【Abstract】 As can be seen from the phase chart analysis,the solid solution degree in austenite falls sharply with the descending temperature. If no effective diminishing measures are taken,pure iron would exist in the bi-phase region of liquid and solid in a certain range of temperatures,due to the presence of excessive sulfur. Such status will lead to the reduction of binding capacity because of the existence of liquid film in the grain boundaries in austenite,and thus the so-called "red brittleness" phenomenon would occur. The analysis below can be used as a vivid case to demonstrate the application of phase charts and to show its significance in the practice teaching process.

【关键词】 工业纯铁相图锻造红脆
【Key words】 industrial pure ironphase chartforgingred brittlenesssulfur
  • 【文献出处】 实验科学与技术 ,Experiment Science & Technology , 编辑部邮箱 ,2009年05期
  • 【分类号】TG316
  • 【被引频次】3
  • 【下载频次】238
节点文献中: 

本文链接的文献网络图示:

本文的引文网络