节点文献

烧结原料加热过程中SO2排放特性的实验研究

Investigation on Characteristics of SO2 Emission during Temperature Increasing of Sintering Materials

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 鄂琳琳程相利苍大强白皓宗燕兵张龙

【Author】 E Linlin et al

【机构】 北京科技大学冶金与生态工程学院

【摘要】 研究了升温过程中燃料、铁矿粉、燃料与铁矿粉混合物、烧结混匀料的SO2产生特性;以及混匀料、燃料、铁矿粉在1000℃和1100℃保温时的SO2产生特性;并研究了混匀料不同碱度对SO2产生特性的影响。研究发现,燃料加热到600℃后开始生成较多的SO2,铁矿粉加热到950℃后开始生成SO2,混匀料加热到1000℃后才产生SO2,且产生量很小。当混匀料的碱度从1.0增加到1.2时,SO2产生量减少了80%;当碱度增加到1.4时,SO2产生量只是又减少了1%左右。

【Abstract】 The SO2 emission characteristics of fules,iron ore fines,mixture of fuels and iron ore fines,and the blended sintering materials were investigated during temperature increasing.The characteristics of SO2 emission of blended sintering material,fuels and iron ore fines were investigated when the temperature were kept at 1 000 ℃ and 1 100 ℃.Further more,the influence of alkalinity of blended sintering material on SO2 emission was investigated.It was found from the experiment that when the fuels are heated to 600 ℃,more SO2 is emitted,when the iron ore fines are heated to 950 ℃,SO2 is emitted,and when the blended raw materials are heated to 1 000 ℃,SO2 is emitted and the amount is very little.The amount of SO2 emission is reduced by 80% when the alkalinity of blended sintering material is increased from 1.0 to 1.2,and SO2 emission is reduced by only 1% more when the alkalinity is increased to 1.4.

【基金】 长江学者和创新团队发展计划资助项目(IRT0708)
  • 【文献出处】 烧结球团 ,Sintering and Pelletizing , 编辑部邮箱 ,2009年06期
  • 【分类号】TF046.4
  • 【被引频次】3
  • 【下载频次】105
节点文献中: 

本文链接的文献网络图示:

本文的引文网络