节点文献

退火对化学镀镍-磷-纳米金刚石复合膜的结构和性能的影响

Effect of Annealing on Structure and Properties of Nickel-phosphor-diamond Composite Films Prepared by Chemical Plating

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 廖一峰黄元盛毛桂生

【Author】 LIAO Yifeng1,HUANG Yuansheng2,MAO Guisheng1(1.Institute of Physics and Mechanical-electronics,Shaoguan University,Shaoguan 512005,China;2.Department of Materials Technology,Jiangmen Polytechnic College,Jiangmen 529090,China)

【机构】 韶关学院物理与机电学院江门职业技术学院材料技术系

【摘要】 在45钢表面进行化学镀镍-磷-纳米金刚石复合膜,使用X射线衍射仪、刻划法和盐水浸蚀法研究了退火对复合膜的结构和性能的影响。结果表明,退火前为非晶镍磷合金和纳米金刚石粉的混合膜,随退火温度的升高,镍磷合金发生晶化和晶粒长大;退火前镀层硬度为930 HV,退火后硬度超过1600 HV;退火后的附着力提高;耐蚀性比0Cr18Ni9Ti要好。

【Abstract】 The composite chemical Ni-plating on the 45 steel surface was carried out.The effects of annealing on structure and properties of nickel-phosphor-diamond composite films were studied by X-ray diffraction,score and brine corrode.The results show that the structure is amorphous non-nickel-phosphorus alloy,and changed crystallization and crystal grain result in the increase of the micro-hardness.It is 930.0 HV and 1600 HV before and after annealing;the force of adhesion is up;the corrosion resistance is better than 0Cr18Ni9Ti steel.

【关键词】 化学镀镍退火复合膜
【Key words】 electroless Ni-platingannealingcomposite film
【基金】 韶关市科技计划项目(313-140379)
  • 【文献出处】 热加工工艺 ,Hot Working Technology , 编辑部邮箱 ,2009年14期
  • 【分类号】TG174.41
  • 【被引频次】3
  • 【下载频次】188
节点文献中: 

本文链接的文献网络图示:

本文的引文网络