节点文献

低碳铝镇静钢中AlN的沉淀析出

Precipitation of Aluminum Nitride in Low Carbon Aluminum-Killed Steel

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘阳春傅杰吴华杰

【Author】 LIU Yang-chun1,FU Jie2,WU Hua-jie3(1.Shougang Technology Research Institute,Beijing 100041,China;2.School of Metallurgical and EcologicalEngineering,University of Science and Technology Beijing,Beijing 100083,China;3.MetallurgicalEngineering Research Institute,University of Science and Technology Beijing,Beijing 100083,China)

【机构】 首钢技术研究院北京科技大学冶金与生态工程学院北京科技大学冶金工程研究院

【摘要】 利用热处理和化学相分析对薄板坯连铸连轧低碳铝镇静钢中AlN的沉淀析出行为进行了试验研究。结果显示,在薄板坯连铸连轧的低碳铝镇静钢中仅有很少量的氮被固定为AlN,大部分氮仍为自由氮,其原因是在薄板坯连铸连轧流程中的连铸出坯、均热、连轧和层流冷却等阶段,AlN在钢中很少沉淀析出。在热轧钢板卷取后的缓慢空冷过程中可以沉淀析出少量的AlN,这些AlN不能起到细化晶粒的作用。

【Abstract】 The precipitation of aluminum nitride in low carbon aluminum-killed steels produced by TSCR is studied by means of heat treatment and chemical phase analysis.The results show that only a small quantity of nitrogen is changed into aluminum nitride in low carbon aluminum-killed steel produced by TSCR,and the great mass of nitrogen in steel is still free nitrogen.Aluminum nitride is mainly precipitated during the period of slow air cooling after coiling the hot rolled sheet,but not precipitated during the period of continuous casting before entering the furnace,symmetrical heating in the furnace,hot rolling and water cooling.The aluminum nitride can′t refine the grain of steel.

【基金】 国家自然科学基金资助项目(50334010);国家“973”新一代钢铁材料重大基础研究资助项目(G1998061500)
  • 【文献出处】 钢铁研究学报 ,Journal of Iron and Steel Research , 编辑部邮箱 ,2009年06期
  • 【分类号】TG142.1
  • 【被引频次】13
  • 【下载频次】616
节点文献中: 

本文链接的文献网络图示:

本文的引文网络