节点文献

煤样致密度对LIBS测量的影响

Effects of coal-sampling density on the elemental analysis by using laser-induced breakdown spectroscopy

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李捷陆继东林兆祥谢承利

【Author】 Li Jie1 Lu Jidong1 Lin Zhaoxiang2 Xie Chengli1(1 State Key Laboratory of Coal Combustion,Huazhong University of Science and Technology,Wuhan 430074,China;2.Laboratory for Laser Spectrum Research,South-Central Universityfor Nationalities,Wuhan 430074,China)

【机构】 华中科技大学煤燃烧国家重点实验室中南民族大学激光光谱实验室

【摘要】 选用不同产地的3种代表性煤样为对象,采用粉状煤样和不同压力下制备成的片状煤样进行实验,以分析煤样致密度的影响.得出了粉状煤样和片状煤样在200~850 nm波段内的光谱图,定性分析了C,H,O,N,Al,Fe,Ca,Mg,Si,Ti,Na和K等元素.对强度大、干扰小的C,Al,Ca,Mg,Si和Ti元素的谱线进行分析,通过谱线强度及其相对标准偏差、谱线强度比及其相对标准偏差来比较煤样致密度对定标曲线法和内标法测量的影响.实验结果表明:致密度对定标曲线法定量分析的影响较大,而对内标法定量分析的影响较小.

【Abstract】 Three representative coals from different mines were sampled for analysis.In order to investigate the effects of density of samples on the coal analysis by laser-induced breakdown spectroscopy,the powder samples and pellet samples which pressed with different pressures were selected for the experiment.The spectra of 200~850 nm of powder and pellet coal samples were obtained,and the emission lines of components such as C,H,O,N,Al,Fe,Ca,Mg,Si,Ti,Na and K were recorded.Emission lines of C,Al,Ca,Mg,Si and Ti elements were chosen for analysis of calibration curve method and internal standardization method because of their high intensity and little interference.The results showed that the density of the samples has more effects on the calibration curve method than the internal standardization method.

【基金】 国家自然科学基金资助项目(50576029,50646037);华中科技大学煤燃烧国家重点实验室开放基金资助项目
  • 【文献出处】 华中科技大学学报(自然科学版) ,Journal of Huazhong University of Science and Technology(Nature Science Edition) , 编辑部邮箱 ,2009年02期
  • 【分类号】TQ533.6
  • 【被引频次】4
  • 【下载频次】288
节点文献中: 

本文链接的文献网络图示:

本文的引文网络