节点文献

高能聚焦质子束无掩模刻写方法研究初步

Proton beam writing of microstructures on Shanghai SPM system

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 刘江峰包良满李晓林

【Author】 LIU Jiangfeng1,2 BAO Liangman1 LI Xiaolin1 1(Shanghai Institute of Applied Physics,Chinese Academy of Sciences,Shanghai 201800,China) 2(Xinyang Normal University,Xinyang 464000,China)

【机构】 中国科学院上海应用物理研究所信阳师范学院

【摘要】 在中国科学院上海应用物理研究所的扫描质子微探针装置上,研制了图形化扫描器,同时研究了适合质子束刻写的光刻胶制备、显影、定影技术。在此基础上,开展高能聚焦质子束无掩模刻写实验,在厚度约11μm的PMMA光刻胶上刻写出高纵横比的任意图案,取得了初步质子刻写结果,为进一步开展质子纳米束刻写奠定基础。

【Abstract】 Proton beam writing(PBW) is a direct writing technique allowing the creation of three-dimensional structures with a high aspect ratio in the micrometer and nanometer range in photoresist materials without the use of a templates.On the scanning proton microprobe(SPM) at Shanghai Institute of Applied Physics,this technique was established recently.In this paper,progresses in this area of research are presented.PBW was successfully performed with the positive resist polymethyl methacrylate(PMMA).With the new scanning system being commissioned,a new scan program was developed and tested which is dedicated to the creation of arbitrarily shaped structures.

【关键词】 微结构质子束刻写无掩模光刻胶
【Key words】 MicrostructuresProton beam writingMasklessPhotoresist
【基金】 国家自然科学基金项目(10490182);信阳师范学院青年基金(20080212)资助
  • 【分类号】TN305.7
  • 【被引频次】5
  • 【下载频次】127
节点文献中: 

本文链接的文献网络图示:

本文的引文网络