节点文献

石钢三流中间包结构优化的数值模拟与工业实验研究

Mathematical Simulation of Shigang Tundish and Analysis of Industrial Experiment

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 黄永建刘才张彩军

【Author】 HUANG Yong-jian1,2, LIU Cai1, ZHANG Cai-jun3 (1. College of Mechanical Engineering, Yanshan University, Qinhuangdao, Hebei 066004, China; 2. Department of Security and Cleanness, Shijiazhuang Iorn and Steel Co., Ltd., Shijiazhuang, Hebei 050031 China; 3. College of Metallurgy and Energy, Hebei Polytechnic University, Tangshan, Hebei 063009, China)

【机构】 燕山大学机械工程学院石家庄钢铁公司安全清洁生产部河北理工大学冶金与能源学院

【摘要】 以石钢三流中间包为研究对象,建立了中间包钢液流动与传热的三维耦合数学模型,并采用随机轨道模型对比分析了中间包有、无控流装置时夹杂物的去除效果,结合工业实验优化了中间包结构.结果表明,中间包加入控流装置以后,中间包离入口最远的第1流及离入口最近的第2流之间的温差由3℃以上降低到1.5℃,进出口最大温差由20℃以上降低到16.5℃以下,中间包夹杂物去除率提高77%以上;工业实验分析发现,中间包钢水存在二次污染的现象.

【Abstract】 The three-strand tundish in Shigang Steel was simulated to set up a mathematical model in relation to the three-dimensional flow field, temperature distribution. The inclusion elimination effect of tundish with and without flow control device was analyzed by random walk model, and combined with industrial experiment the tundish structure was optimized. The results showed that by adding tundish flow control devices, the temperature difference was reduced by more than 3℃ to 1.5℃ between No.1 stream which was the nearest to the tundish entrance and No.2 stream which was the farthest away from the tundish entrance, the maximum temperature difference between inlets and outlets reducd by above 20℃ to below 16.5℃, the removal rate of inclusions was increased more than 77% in the tundish. Analysis of industrial experimental result showed that the molten steel was polluted again.

  • 【文献出处】 过程工程学报 ,The Chinese Journal of Process Engineering , 编辑部邮箱 ,2009年S1期
  • 【分类号】TF777.7
  • 【被引频次】6
  • 【下载频次】145
节点文献中: 

本文链接的文献网络图示:

本文的引文网络