节点文献

角锥型非平面环形激光器偏振反射镜的影响及热稳定性分析

Output Mirror Design and Thermal Stability Analysis of Corner Cube-Based Non-Planar Ring Laser

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 巩轲吴克瑛何淑芳霍玉晶

【Author】 Gong Ke Wu Keying He Shufang Huo Yujing(Department of Electronic Engineering,Tsinghua University,Beijing 100084,China)

【机构】 清华大学电子工程系

【摘要】 针对热键合直角棱镜和角锥棱镜构成的946 nm激光器,详细讨论了输出端946 nm介质膜反射镜对单频运转的影响及热稳定性问题。指出通过改变p分量的透射比不能有效增加腔内激光的线偏振度;增强施加在角锥棱镜上的磁场强度,不仅可以显著提高腔内激光的线偏振度,减小输出激光的损耗,而且可在提供相同环路损耗差的情况下,降低对946 nm激光p分量的高透要求。通过传播矩阵方法,研究了该准单块非平面环形腔的热稳定性及高斯光束能量分布问题。

【Abstract】 Influence of 946 nm dielectric output mirror on single-frequency operation and thermal stability are discussed in detail for the 946 nm laser consisting of thermally bonded Porro prism and corner cube.Degree of linear polarization inside the cavity will not increase significantly by changing the transmittance of p component,while enhancement of the magnetic field applied to the corner cube will not only raise degree of linear polarization inside the cavity efficiently and reduce the output loss,but also decrease the transmittance of p component for the same roundtrip loss difference.Thermal stability and Gaussian beam distribution of this quasi-monolithic non-planar ring cavity are studied by method of propagation matrix.

【基金】 国家自然科学基金(60608005)资助课题
  • 【文献出处】 光学学报 ,Acta Optica Sinica , 编辑部邮箱 ,2009年12期
  • 【分类号】TN248
  • 【被引频次】2
  • 【下载频次】132
节点文献中: 

本文链接的文献网络图示:

本文的引文网络