节点文献

超临界直流锅炉螺旋管圈水冷壁流量分配及壁温计算

Calculation on Flow Rate Distribution and Wall Temperature of Waterwall with Spiral Tube Coils of Supercritical Once-through Boilers

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张魏静杨冬黄莺张彦军华洪渊

【Author】 ZHANG Wei-jing~1,YANG Dong~1,HUANG Ying~2,ZHANG Yan-jun~2,HUA Hong-yuan~2(1.State Key Lab of Multiphase Flow in Power Engineering,Xi’an Jiaotong University,Xi’an 710049,China;2.Harbin Boiler Co.,Ltd.,Harbin 150046,China)

【机构】 西安交通大学动力工程多相流国家重点实验室哈尔滨锅炉厂有限责任公司

【摘要】 根据回路和节点所遵守的质量守恒、动量守恒和能量守恒方程,建立了计算螺旋管圈水冷壁流量和壁温的数学模型.在此基础上,对1台350 MW超临界燃煤锅炉在不同负荷下的水冷壁流量分配及壁温分布进行了计算.结果表明:在锅炉最大连续蒸发量(BMCR)、75%BMCR及30%BMCR负荷下,螺旋管圈水冷壁的流量偏差不超过±6%,工质出口温差不超过10 K,流量偏差和热偏差均较小;各负荷下管壁温度均处于管子的许用温度范围之内,锅炉运行安全可靠.

【Abstract】 The mathematical model for calculation on flow rate and wall temperature of the waterwall with spiral tube coils was established according to the mass conservation,momentum conservation and energy conservation equations observed by the circuit and node.Then the flow rate distribution and wall temperature distribution of a 350 MW supercritical coal-fired boiler were calculated under different loads.Results show that for the waterwall with spiral tube coils,the flow rate deviations are no higher than ±6%,and the outlet temperature differences of the working medium are no higher than 10 K under the loads of boiler maximum continuous rating(BMCR),75% BMCR and 30% BMCR respectively.Both the flow rate deviation and thermal deviation are small.Under each load,the wall temperatures of the tubes are always within the allowable temperature range,and the operation of the boiler is safe and reliable.

【基金】 “十一五”国家科技支撑计划“超临界循环流化床”资助项目(2006BAA03B02-03)
  • 【文献出处】 动力工程 ,Journal of Power Engineering , 编辑部邮箱 ,2009年04期
  • 【分类号】TK229.2
  • 【被引频次】29
  • 【下载频次】682
节点文献中: 

本文链接的文献网络图示:

本文的引文网络