节点文献
固溶时效后高氮奥氏体不锈钢的物理化学相分析
Physicochemical phase analysis of high nitrogen austenitic stainless steels after solution treatment and aging
【摘要】 采用物理化学相分析技术研究了高氮奥氏体不锈钢固溶时效后的碳、氮化物析出行为,确定了析出相的类型、粒度分布、含量及组成结构式.结果表明:氮含量低的1Cr22Mn15N0.6以M23C6型碳化物析出为主,氮含量高的1Cr22Mn15N0.9以(CrFe)2N1-x型氮化物析出为主,高氮奥氏体不锈钢中析出物的总量随时效时间的延长而增加.
【Abstract】 Precipitation of nitrides and carbides in high nitrogen austenitic stainless steels after solution treatment and aging was investigated by using a physicochemical phase analysis method.The character,particle size distribution,content and structural formulae of phases in the alloy were determined.It is shown that the precipitate is mostly M23C6 carbide in 1Cr22Mn15N0.6 steel and(CrFe)2N1-x nitride in 1Cr22Mn15N0.9 steel respectively,and its volume fraction increases with prolonging the aging time.
【关键词】 高氮奥氏体不锈钢;
固溶时效;
物理化学相分析;
析出行为;
【Key words】 high nitrogen austenitic stainless steel; solution treatment and aging process; physicochemical phase analysis; precipitation behavior;
【Key words】 high nitrogen austenitic stainless steel; solution treatment and aging process; physicochemical phase analysis; precipitation behavior;
【基金】 国家重点基础研究发展计划资助项目(No.2004CB619103)
- 【文献出处】 北京科技大学学报 ,Journal of University of Science and Technology Beijing , 编辑部邮箱 ,2009年03期
- 【分类号】TG142.71
- 【被引频次】5
- 【下载频次】595