节点文献

铝/钛异种合金激光熔钎焊接头界面特性

Interface characteristic and property of Ti/Al dissimilar alloys joint with laser welding-brazing

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 陈树海李俐群陈彦宾

【Author】 CHEN Shu-hai,LI Li-qun,CHEN Yan-bin(State Key Laboratory of Advanced Welding Production Technology,Harbin Institute of Technology,Harbin 150001,China)

【机构】 哈尔滨工业大学现代焊接生产技术国家重点实验室哈尔滨工业大学现代焊接生产技术国家重点实验室 哈尔滨150001哈尔滨150001

【摘要】 以铝硅共晶合金为填充材料,采用激光熔钎焊的方法对铝/钛异种合金进行焊接,获得了同时具有熔焊和钎焊双重特征的焊接接头。由于激光局部加热并且有很高的冷却速度,发现在钛合金附近的钎焊界面形成了特殊的形态结构。结果表明,获得的钛合金钎焊区界面金属间化合物厚度很薄,仅在10μm以下。焊缝上部界面金属间化合物较厚,主要呈锯齿状;焊缝下部界面金属间化合物厚度不足1μm,呈薄层状。界面金属间化合物的主要成分为TiAl3,以Ti(SixAl1-x)3结构的置换固溶体形式存在。底部界面容易成为裂纹产生的源头,裂纹多沿界面附近焊缝中的共晶组织扩展,接头的平均抗拉强度为铝母材的85%左右。

【Abstract】 With Al-Si eutectic filler wire,Al/Ti dissimilar alloys were joined by the laser welding-brazing process,and the joints with the characters welding and brazing were gained.Due to the local heating of laser and the high cooling rate of the welding seam,special morphology at the interface of titanium substrate and filler metal was found.The results indicate that the maximum of the intermetallic compounds layer is less than 10 μm.Moreover,the thickness and structure of the interface layer at different positions of the same joint are various.At the top of the joint,the layer is thick and presents serrated-shape;at the bottom,the thickness of the interface layer is less than 1μm and exhibits lamellar-shape.In addition,TiAl3 is the main phase of the interface layer,which is a typical substitution solid solution of Ti(SixAl1-x)3.Crack starts at the bottom of the joint and grows in the eutectic structure of the seam metal near the brazing interface.The average tensile strength of the joint is up to 85% of that of the Al base metal.

【基金】 国家自然科学基金资助项目(50275036)
  • 【文献出处】 中国有色金属学报 ,The Chinese Journal of Nonferrous Metals , 编辑部邮箱 ,2008年06期
  • 【分类号】TG407
  • 【被引频次】66
  • 【下载频次】930
节点文献中: 

本文链接的文献网络图示:

本文的引文网络