节点文献

铸态Mg-Zn-Er-Zr合金显微组织和力学性能的研究

Research on Microstructure and Mechanical Properties of Mg-Zn-Er-Zr Alloy As-cast

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 邱从章刘楚明常亚喆李慧中王孟君

【Author】 QIU Congzhang1,LIU Chuming1,2,CHANG Yazhe1,3,LI Huizhong1,WANG Mengjun1,2(1.School of Materials Science and Engineering,Central South University,Changsha 410083,China;2.State Key Laboratory of Material Processing and Die & Mould Technology,Wuhan 430074,China;3.China Airborne Missile Academy,Luoyang 471009,China)

【机构】 中南大学材料科学与工程学院

【摘要】 通过显微组织观察和力学性能测试等手段研究了铸态Mg-Zn-Er-Zr合金的组织和力学性能。结果表明,添加0.6%Er+1%Zn,在晶界处形成Mg-Zn、Mg-Er、Mg-Er-Zn的质点阻碍了枝晶生长,起到细化晶粒的作用,晶粒尺寸减小到60μm左右,抗拉强度、屈服强度和伸长率分别达到198.8MPa、83.0MPa和24.5%,较Mg-0.6Zr合金均有不同程度的提高。

【Abstract】 The microstructure and mechanical properties of Mg-Zn-Er-Zr alloy as-cast was investigated by microstructure observation and property testing.The results show that adding 0.6%Er + 1%Zn in the Mg-0.6Zr,the compounds of Mg-Er,Mg-Zn and Mg-Er-Zn restrain the crystal grain to grow up,and the grain observably fines about 60 μm.The σb,σ0.2 and δ of the Mg-1Zn-0.6Er-0.6Zr alloy is up to 198.8 MPa,83.0 MPa and 24.5% respectively.The mechanical properties significantly improve compared with Mg-0.6Zr alloy.

  • 【文献出处】 热加工工艺 ,Hot Working Technology , 编辑部邮箱 ,2008年14期
  • 【分类号】TG146.22
  • 【被引频次】11
  • 【下载频次】177
节点文献中: 

本文链接的文献网络图示:

本文的引文网络