节点文献
硅含量对高钒高速钢碳化物的影响
Effects of Silicon Content on Carbides in High Vanadium High-speed Steel
【摘要】 针对一组不同成分高钒高速钢,研究了硅含量(质量分数)在0.31%~5.03%范围内变化对其碳化物的影响。结果表明:硅含量较低时,高钒高速钢中碳化物以粒状、条状VC为主,同时存在独立的钼、铬碳化物;硅含量达2.1%时,开始出现花状碳化物,随着硅含量的进一步增加,花状碳化物增多、长大,而独立的钼、铬碳化物逐渐减少;由EPMA及XRD分析可知,花状碳化物为VC型碳化物,钼、铬元素主要固溶于钒的碳化物中。
【Abstract】 Aimed at a group of high vanadium high-speed steels with different composition,the effects of silicon content (0.31%~5.03%,mass fraction) on carbides were studied. The results show that the carbides are mainly granular VC and isolated carbides with molybdenum or chromium in high vanadium high-speed steel with low silicon content. The like-flower carbides starts to occur and grow up with the increase of silicon content above 2.1%. Meanwhile,the isolated carbides with molybdenum or chromium decrease. By means of EPMA and XRD,it’s known that the like-flower carbides are of VC type,and molybdenum and chromium elements mainly dissolves into vanadium carbides.
- 【文献出处】 热加工工艺 ,Hot Working Technology , 编辑部邮箱 ,2008年09期
- 【分类号】TG142.15
- 【被引频次】2
- 【下载频次】173