节点文献
水热处理钛酸钠制备锐钛相TiO2纤维
Preparation of Anatase TiO2 Crystal Fibers by Hydrothermal Retreated Sodium Titanate
【摘要】 本文采用水热法,以10mol/LNaOH作矿化剂,填充度68%,反应温度180℃,反应时间为24h,合成了钛酸钠晶体纤维。对所合成的晶体纤维进行了二次水热处理,所采用的溶液pH值分别为2、5、11、14,温度为180℃,填充度68%,反应时间为24h。在酸性溶液条件下,合成了具有自组织趋势的线状锐钛相TiO2纳米聚晶,单个的纳米晶长度约30~100nm,宽度10~20nm。在强碱性条件下,晶体结构未发生变化,仍为纤维状钛酸盐。
【Abstract】 Sodium titanate crystal fibers were synthesized with 10 mol/L NaOH solutions as the mineralizing reagent with hydrothermal method at 180 ℃ for 24 h,and the fill factor was 68% in this paper,The synthesized crystal fiber was retreated by hydrothermal method,the adopted pH value were 2,5,11 and 14 respectively,the reacting temperature was 180 ℃,the time was 24 h,and the fill factor was 68%.The wirelike anatase TiO2 nano-crystals aggregation with character of self-organizing were synthesized in the acid condition,and the single nano-crystal’ length and width were about 30-100 nm and 10-20 nm respectively.In the strong alkali condition,the crystal structure was not changed,it was still titanate fiber.
- 【文献出处】 人工晶体学报 ,Journal of Synthetic Crystals , 编辑部邮箱 ,2008年06期
- 【分类号】O614.411
- 【被引频次】15
- 【下载频次】334