【摘要】 为了评估掩星接收机误差对无线电掩星探测精度的影响,利用EGOPS软件仿真研究了多普勒偏差、多普勒频移、时钟稳定性/单差分、接收机噪声和局部多路径等对GNSS无线电掩星反演大气温度、折射率、密度、压力廓线的影响。模拟设计过程中选择METOP作为接收的LEO卫星,GPS星座作为发射系统,设置GRAS天线。从模拟的567个掩星事件中选择了一个上升掩星事件和一个下降掩星事件进行模拟分析。研究结果表明:对于设置的"最差"情况,温度误差最大值大部分出现在平流层顶附近,其中多普勒偏差引起的温度误差最大值接近2K,多普勒频移引起的温度误差最大值小于0.3K,时钟稳定性/单差分引起的温度误差最大值接近3K,现实接收机噪声引起的温度误差最大值超过了4K,局部多路径引起的温度误差最大值小于1.5K。经讨论分析认为:对于高质量的无线电掩星反演,掩星接收机误差源中最主要的是接收机热噪声、时钟稳定性/单差分和多普勒偏差。文中还随机选取了30个掩星事件进行统计分析,将其温度反演结果与ECMWF分析场数据比较得出,温度误差的平均偏差在45km高度上最大,约为1K;最大标准偏差出现在平流层顶,约为5K,这验证了廓线反演算法的有效性,表明了误差分析结果的正确性和普遍性。更多还原

【Abstract】 In order to evaluate the influences on the radio occultation sounding accuracy affected by occultation receiver errors, we employ the EGOPS simulation software to evaluate the influences on the temperature, refractivity, density and pressure profiles retrieval by occultation receiver noises respectively, which include the doppler biases and drifts, clock stability/single-differencing, receiver thermal noise and multipath. METOP and GPS constellation are selected as LEO satellite and transmit system respectively, and GRAS antenna is setting in the simulation process. From the 567 simulated occultation events, one rising and one setting occultation events are tested in the simulation. The results show that the maximum temperature deviation is reached to 2 K due to the influence of the Doppler bias, 0.3 K due to the influence of the Doppler shift, 3 K due to the influence of the Clock stability/single-differencing, over 4 K due to the influence of the receiver thermal noise and 1.5 K due to the influence of the multipath respectively. It can be seen that the worst situation for temperature retrieval is near the stratopause. The major error sources are the impact of the Receiver thermal noise, Clock stability/single differencing and POD-induced Doppler biases. For the purpose of statistical analysis, thirty occultation events are accounted to calculate the temperature retrieval deviation with the ECMWF data. We find that the average deviation of temperature reach 1 K at 45 km height, and the standard bias reach its maximum at stratopause with the value of about 5 K, while the maximum deviation is 5 K at stratopause. Through the simulation and inversion processing, the results we have been achieved are validated.更多还原