【摘要】 以IVECO轻型客车发动机罩内板为研究对象,利用ETA/DYNAFORM软件建立了冲压成形的有限元模型。分析了坯料形状、拉深筋、压边力及摩擦润滑条件对冲压成形质量的影响,通过对冲压参数的调整,消除了开裂和起皱,并与实际测量值进行对比,验证了模型的准确性。更多还原

【Abstract】 IVECO light-duty vehicle hood inner panel was taken as an object to simulate,which used CATIA software as modeling tools and the surface data in an IGES format was imported to DYNAFORM for forming simulation.On the base of summing up the latest achievement made both at home and abroad,the practical application of sheet metal forming numerical simulation was discussed and further researched.The influences to the forming quality of these factors such as blank size,drawabeads binder force and lubricative condition have been analyzed,and through the optimization of these factors,cracking and wrinkling were eliminated.This effect of optimization has been verified through the comparison between simulation and the test results.更多还原