节点文献

预变形量对CuZnAlZr合金阻尼性能的影响

Effect of pre-deformation on damping properties of Cu69.17Zn27.04Al3.62Zr0.17 alloy

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李宁龚勤慧文玉华黄姝珂黄勇丁胜

【Author】 LI Ning,GONG Qin-hui,WEN Yu-hua,HUANG Shu-ke,HUANG Yong,DING Sheng (College of Manufacturing Science and Engineering,Sichuan University,Chengdu Sichuan 610065,China)

【机构】 四川大学制造科学与工程学院四川大学制造科学与工程学院 四川成都610065四川成都610065

【摘要】 通过对Cu69·17Zn27·04Al3·62Zr0·17减振合金阻尼机制的研究,分析了预变形处理对该合金阻尼性能的影响。结果表明,在预变形处理时,该合金发生了应力诱发马氏体转变。预变形量在0~2%区间,随预变形量增大,合金的阻尼性能增加;在预变形量为2%时,合金的阻尼性能达到最大值;但随预变形量的进一步增大,合金的阻尼性能开始下降。

【Abstract】 The damping mechanism of Cu69.17Zn27.04Al3.62Zr0.17 alloy was studied and the effects of pre-deformation treatment on its damping property were also investigated.The results show that stress-induced martensite transformation of Cu69.17Zn27.04Al3.62Zr0.17 alloy occurs during pre-deformation treatment.Within the pre-deformation ratio of 0 to 2 %,the higher the pre-deformation is,the higher the damping property is.The internal friction reaches the highest value when the pre-deformation increases to 2 %,then the damping property decreases with the increasing of pre-deformation.

【基金】 上海交通大学机械系统与振动国家重点实验室基金(VSN-2007-04)
  • 【文献出处】 金属热处理 ,Heat Treatment of Metals , 编辑部邮箱 ,2008年06期
  • 【分类号】TG146.11
  • 【被引频次】1
  • 【下载频次】89
节点文献中: 

本文链接的文献网络图示:

本文的引文网络