节点文献

适宜太钢4350m~3高炉炉渣的成分

Slag Component Suitable for 4350m~3 BF of Taigang

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 郭豪张建良张华张曦东张旭

【Author】 GUO Hao1,ZHANG Jian-liang1,ZHANG Hua2,ZHANG Xi-dong1,ZHANG Xu1 (1.School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China;2.Taiyuan Iron and Steel Group Co Ltd,Taiyuan 030000,Shanxi,China)

【机构】 北京科技大学冶金与生态工程学院太原钢铁集团有限公司

【摘要】 根据太钢4350m3高炉的原燃料条件,研究了炉渣二元碱度(R=CaO/SiO2)、MgO含量和Al2O3含量对高炉渣流动性及熔化性温度的影响,从理论上分析了炉渣中Al2O3及MgO的适宜含量范围。结果表明,在原燃料条件下,炉渣碱度在1.20左右,MgO含量约11%,Al2O3含量为14%~15%时,炉渣流动性较好。

【Abstract】 According to the charging condition of 4 350 m3 BF in Taigang,the influence of basicity,MgO and Al2O3 content on viscosity and melting temperature of BF slag was studied,and the optimal slagging regime has been provided.Considering the practice of Taigang,the favorable range of slag composition is as follows: the binary basicity is about 1.20,MgO content is about 11% or so,and Al2O3 content should be in the range from 14% to 15%.

【关键词】 炉渣流动性碱度熔化性温度
【Key words】 slagfluiditybasicitymelting temperature
  • 【文献出处】 钢铁研究学报 ,Journal of Iron and Steel Research , 编辑部邮箱 ,2008年09期
  • 【分类号】TF534.1
  • 【被引频次】14
  • 【下载频次】286
节点文献中: 

本文链接的文献网络图示:

本文的引文网络