节点文献

处理造纸法烟草薄片生产废水的试验研究

Study on Treatment of Wastewater from Manufacture of Tobacco Slice by Papermaking Process

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李友明陈元彩陈中豪陈金中段煌潘伟才

【Author】 LI You-ming1,CHEN Yuan-cai1,CHEN Zhong-hao1,CHEN Jin-zhong1,DUAN Huang2,PAN Wei-cai3(1.National Engineering Research Center of Papermaking & Pollution Control,South China University of Technology,Guangzhou 510640,China;2.Guangdong Jinye Tobacco Slice Technology Development Co.Ltd.,Shantou 515600,China;3.Guangdong Province Co.,China National Tobacco Corporation,Guangzhou 510610,China)

【机构】 华南理工大学造纸与污染控制国家工程研究中心广东金叶烟草薄片技术开发有限公司中国烟草总公司广东省公司 广东广州510640广东广州510640广东汕头515600广东广州510610

【摘要】 采用混凝—厌氧—好氧—深度处理的中试系统处理造纸法烟草薄片生产废水。结果表明,厌氧处理的水力停留时间为8~12h,COD负荷为8~12kgCOD/(m3.d)时,对COD的去除率为80%~90%。好氧处理对COD的去除率为48%~70%。出水COD、BOD5、SS和色度最终分别达到100、50、25mg/L和70倍,各项出水指标均优于烟草薄片厂目前已有的处理系统。

【Abstract】 The pilot system composed of coagulation,anaerobic,aerobic and advanced treatment processes was used to treat wastewater from manufacture of tobacco slice by papermaking process.The results show that when the HRT of UASG is 8 to 12 h and COD is 8 to 12 kgCOD/(m3·d),the removal rate of COD is 80% to 90%.The aerobic treatment removes COD by 48% to 70%.The COD,BOD5,SS and color in the effluent are below 100 mg/L,50 mg/L,25 mg/L and 70 times respectively.The effluent indexes of the system are more excellent than those of the existing system.

【关键词】 烟草薄片造纸法UASG
【Key words】 tobacco slicepapermaking processUASG
【基金】 广东省烟草局科技资助项目(200506);教育部“长江学者和创新团队发展计划”项目(IRT0552)
  • 【文献出处】 中国给水排水 ,China Water & Wastewater , 编辑部邮箱 ,2008年03期
  • 【分类号】X703.1
  • 【被引频次】17
  • 【下载频次】347
节点文献中: 

本文链接的文献网络图示:

本文的引文网络