节点文献

甲烷燃烧法合成纳米二氧化钛的试验研究

Experimental Study of Nano-sized TiO2 Synthesized by Flame of CH4

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李敏李盼孙博邱安娥

【Author】 Li Min1, Li Pan2, Sun Bo3, Qiu An’e1 (1. School of Mechanical Science and Engineering, Daqing Petroleum Institute, Daqing 163318; 2 .Daqing Oilfield Engineering Limited Company, Daqing 163318; 3.PetroChina Daqing Petrochemical Company, Daqing 163318,China)

【机构】 大庆石油学院机械科学与工程学院大庆油田工程有限公司中国石油大庆石化公司

【摘要】 以甲烷为燃料、空气为氧化剂、TiC14为原料,采用燃烧法合成了纳米二氧化钛,利用扫描电镜和X射线衍射对制备出的纳米TiO2颗粒产品的颗粒尺寸分布和物相组成进行了表征,通过调节甲烷、空气、载气的流量,并通过热电偶测量火焰温度,制备出不同操作工况下的纳米TiO2产品,讨论了工艺参数对颗粒特性的影响。结果表明,获得的纳米TiO2粒径主要分布在50~70nm,产品中大部分为锐钛矿相,含有少量的金红石相。

【Abstract】 The experimentation of TiO2 nano-particles synthesized by the TiCl4 in methane /air flame was investigated. The size characteristics of particle and phases of products prepared under different operational conditions were analyzed by SEM and XRD. Different TiO2 nano-particles were synthesized by changing velocity of methane, air and TiCl4 flow. The particle characteristic influenced by different operational conditions was discussed. The results showed that the particle size range of nano-sized TiO2 was 50~70 nm. A greater part of the product was anatase phase and a little rutile phase was obtained.

【关键词】 燃烧法纳米二氧化钛工艺参数
【Key words】 combustionnano-sized TiO2process parameters
【基金】 黑龙江省教育厅科学技术研究项目,编号:11521015。
  • 【文献出处】 中国粉体技术 ,China Powder Science and Technology , 编辑部邮箱 ,2008年04期
  • 【分类号】TB383.1
  • 【被引频次】1
  • 【下载频次】154
节点文献中: 

本文链接的文献网络图示:

本文的引文网络