【摘要】 以ARM7TDMI为例提出了一种在RTL仿真时即可进行JTAG调试的方法。利用该方法在RTL仿真时即可进行ARM的JTAG调试。首先详细分析了JTAG的边界扫描标准及工作原理,而后以ARM7TDMI为例分析了ARM的扫描链的设计原理及控制方法,从中给出了如何利用JTAG控制ARM7TDMI扫描链来完成ARM的行为控制。该方法还可以通过ARM的控制进而完成对SoC中其他模块的验证。通过该原理建立JTAG接口软仿真验证平台,可以在RTL仿真时验证ARM的JTAG调试功能以及SoC的初步测试。更多还原

【Abstract】 A method for puting up the RTL verification environment of the JTAG debugger is proposed by the example of ARM7TDMI.The debug of ARM through JTAG interface can be done in the RTL simulation.The JTAG standard and the ARM7TDMI scan chains are also analyzed in this paper.It gives the method to control the ARM7TDMI behavior by JTAG and the scan chains.An ARMTTDMI based verification plat is designed and it can verification the JTAG debugger function when the design is in the RTL phase.更多还原