节点文献

双包层Yb/Er共掺光纤激光器的特性研究

Study on Yb/Er Co-doped Double Cladding Fiber Laser

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 赵崇光; 刘洋; 王蓟; 王立军;

【Author】 ZHAO Chong-guang1,2,LIU Yang 1,2,3,WANG Ji 1,2,4,WANG Li-jun1(1.Laboratory of Excited State Processes,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,CHN;2.Graduate School of the Chinese Academy of Sciences,Beijing 130039,CHN;3.Opto-Electronics Facility,Wuhan Ordnance Non-Commissioned Officers Academy,Wuhan 430075,CHN;4.College of Science,Changchun University of Science and Technology,Changchun 130022,CHN)

【机构】 中国科学院长春光学精密机械与物理研究所激发态实验室; 中国科学院研究生院; 武汉军械士官学校; 长春理工大学理学院;

【摘要】 对980nm抽运的双包层Yb/Er共掺光纤激光器进行了数值模拟,分析了稳态情况下光纤中上能级粒子数,抽运光功率,信号光功率沿光纤轴向的分布。计算了激光器输出功率与光纤长度的关系,激光器输出腔镜反射率与输出功率的关系。根据数值模拟的结果,采用4m长的铒镱共掺双包层光纤作为增益介质,反射率为15%的双包层光纤光栅作输出腔镜组建了全光纤激光器,其斜率效率为40%。在3.4W的最大抽运功率下,得到了1.25W的激光输出,输出光谱宽度为0.49nm。

【Abstract】 Numerical simulations of the Yb/Er co-doped double cladding fiber laser pumped at 980 nm were performed.The upper energy level population,pumping power and signal power along the axis direction of the fiber at stable-state were analyzed.The relation of the output power versus the fiber length and the reflectivity of the output mirror was calculated as well.According to the numerical analysis results,an Yb/Er co-doped double cladding fiber with length of 4 m was employed as the gain medium and a fiber Bragg grating(FBG)with reflectivity of 15% was used as the output mirror to set up a all fiber laser.The slope efficiency of the fiber laser is 40%.At the maximum pump power of 3.4 W,the output power of 1.25 W with an output spectrum width of 0.49 nm was obtained.

【基金】 吉林省自然科学基金资助项目(K04M092)
  • 【文献出处】 半导体光电 ,Semiconductor Optoelectronics , 编辑部邮箱 ,2008年06期
  • 【分类号】TN248
  • 【被引频次】6
  • 【下载频次】262
节点文献中: 

本文链接的文献网络图示:

本文的引文网络