节点文献

Pt/CS复合纳米颗粒的结构表征(英文)

Structure Characterization of Pt/CS Composite Nanoparticies

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 王晓敏姚延立杨晓伟马艾丽郭俊杰许并社

【Author】 WANG Xiao-min1,2, YAO Yan-li1, YANG Xiao-wei1, MA Ai-li1, GUO Jun-jie1, XU Bing-she1,2 (1.College of Materials Science and Engineering, Taiyuan University of Technology,Taiyuan 030024,China; 2. Key Laboratary of Interface Science Engineering in the Advanced Materials, Taiyuan University of Technology, Ministry of Education, Taiyuan 030024, China)

【机构】 太原理工大学材料科学与工程学院太原理工大学材料科学与工程学院 山西太原030024太原理工大学教育部新材料界面与工程重点实验室山西太原030024山西太原030024太原理工大学教育部新材料界面与工程重点实验室

【摘要】 采用化学气相沉积(CVD)法制备得到纳米碳微球(CS),采用浸渍还原法合成了Pt/CS纳米颗粒。电镜观察表明颗粒具有光滑的表面,其平均粒径在300nm左右,同时在产物中没有观察到纳米管和其它杂质。从HRTEM表征结果得出CS上的Pt颗粒分散均匀,直径分布在3~4nm之间。表明在溶液中使用Pt/CS催化剂时Pt颗粒可以均匀的分散于CS表面。在催化剂中Pt的含量为18%。这种较为理想的Pt/CS颗粒分布结果有利于其在燃料电池电极中的电催化作用。

【Abstract】 Carbon spheres(CS) were synthesized by traditional method-chemical vapor deposition (CVD), with a novel precursor-asphaltene. Pt/CS composite nanopaticles were prepared by the method of impregnation reduction. The structure images show the CS particles with quite smooth surface were dispersed with an average diameter of ca.300 nm, without nanotubes and others. SEM image of Pt particles were on the CS from 3~4 nm. This implies that the Pt particles tended to disperse homogeneously on the surface of CS when the Pt/ CS catalyst had been prepared in the solution. Pt content in the catalysts was 18% for Pt/CS. So the size distribution of Pt/CS was in the ideal range to get a good performance of the catalyst in fuel cells electrodes.

【关键词】 Pt/CS燃料电池表征
【Key words】 Pt/ Carbon spherules(CS)fuel cellsCharacterizations
【基金】 国家“973”计划资助项目(2004CB217808);山西省自然科学基金资助项目(2006011054,20063005)
  • 【文献出处】 中山大学学报(自然科学版) ,Acta Scientiarum Naturalium Universitatis Sunyatseni , 编辑部邮箱 ,2007年S1期
  • 【分类号】TB383.1
  • 【被引频次】1
  • 【下载频次】169
节点文献中: 

本文链接的文献网络图示:

本文的引文网络